Masterflex PharMed BPT Tubing, L/S #36, 25'

Masterflex PharMed BPT Tubing, L/S #36, 25' Reviews

Other Picture

Masterflex PharMed BPT Tubing, L/S #36, 25' Feature

• High-Performance Precision PharMed BPT Tubing
• Product Type: Masterflex L/S Tubing
• Pump Series: L/S
• Tubing formulation: Pharmed
• Sterilization Method: Autoclave, Ethylene Oxide, Gamma Irradiation
• Min temperature (° F): -60
• Min temperature (° C): -51
• Max temperature (° F): 270
• Max temperature (° C): 135
• Masterflex tubing size (L/S): 36
• Tubing ID (mm): 9.5
• Tubing ID (inches): 0.38
• Hose barb size (inches): 0.375
• Resin certification (FDA): Yes
• Resin certification (USP): Yes
• Resin certification (NSF): Yes
• Length per pack (m): 7.6
• Length per pack (ft): 25
• Max vacuum (" Hg): 24
• Max vacuum (mm Hg): 610
• Flow range with 6 to 600 rpm drive (ml/min): 29 to 2900
• Flow range with 6 to 600 rpm drive with high performance head (ml/min): 34 to 3400
• Max pressure (psi): 15
• Max pressure (bar): 1.035
• Max pressure continuous (psi): 20
• Max pressure continuous (bar): 1.4
• Suction lift (ft H2O): 27
• Suction lift (m H2O): 8.3
• Brand: Masterflex
• Part Number: AO-06508-36

science-lab-tubing

Visit Store Now !!

Detail Products

Detail Reviews

Oct 24, 2011 03:54:03

White Translucent FEP Tubing, 0.188" ID, 0.313" OD, 0.063" Wall, 50' Length

White Translucent FEP Tubing, 0.188" ID, 0.313" OD, 0.063" Wall, 50' Length Reviews

Other Picture

FEP is in the family of fluoropolymers with similar properties to PTFE (sometimes branded as Teflon(R)). This tubing is transparent, has an excellent coefficient of friction slightly higher than PTFE, and is chemically resistant and considered inert. Maximum working temperature is 400F (204C). FEP is melt processable and can be formed into shapes, and it is weldable and thermoformable. The tubing is biocompatible certified to USP Class VI (chemical composition only). Sterilization methods include Gamma, ETO, e-beam and autoclaving.

Visit Store Now !!

Detail Products

• Translucent Amber PEEK Tubing, 24 AWG, 0.020" ID, 0.024" OD, 0.002" Wall, 72" Length
• Translucent Amber Miniature Polyimide Tubing, 18 AWG, 0.0403" ID, 0.0463" OD, 0.0030" Wall, 12" Length (Pack of 2)
• Clear NSF-61 Polyurethane Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 25' Length
• Stainless Steel 304 Hypodermic Round Tubing, 18 Gauge, 0.05" OD, 0.033" ID, 0.0085" Wall, 60" Length
• Stainless Steel 316 Hypodermic Round Tubing, 16 Gauge, 0.0650" OD, 0.047" ID, 0.009" Wall, 60" Length

Detail Reviews

Oct 22, 2011 02:12:04

Bev-A-Line XX tubing, 1/4"ID x 3/8"OD, 500 ft/pack

Bev-A-Line XX tubing, 1/4"ID x 3/8"OD, 500 ft/pack Reviews

Other Picture

Bev-A-Line XX tubing, 1/4"ID x 3/8"OD, 500 ft/pack Feature

• Bev-A-Line XX Tubing
• Product Type: Nominal Tubing
• Working pressure (psi): 100
• Maximum temperature (° F): 160
• Minimum temperature (° F): -60
• Certifications: FDA, NSF
• Tubing ID (mm): 6.4
• Tubing ID (inches): 0.25
• Tubing OD (inches): 0.375
• Tubing OD (mm): 9.525
• Wall thickness: 1/16" (1.6mm)
• Max psi: 100
• Translucent: Yes
• Sterilizable: Yes
• Color: Translucent
• Feet per pack: 500
• Tubing formulation: Bev-A-Line
• Manufacturer number: 21201350 SIZE B-13
• Brand: Bev-A-Line
• Part Number: AO-06491-54
• Package Quantity: PACKAGE

Applications: High-purity applications and air sampling. Ideal for particulate matter (will not adhere to liner) and applications requiring UV resistance. Characteristics: HYTREL® polyester liner and UV resistant PVC. Tubing is coextruded for improved flexibility. Shell is opaque black. Certification: Liner resin is NSF-approved for potable water. Temperature range: -60 to 160degF (-51 to 71degC) Sterilize: With autoclave or ethylene oxide.

Visit Store Now !!

Detail Products

Detail Reviews

Oct 21, 2011 02:37:03

Translucent Amber Miniature Polyimide Tubing, 14 AWG, 0.0641" ID, 0.0666" OD, 0.00125" Wall, 12" Length (Pack of 50)

Translucent Amber Miniature Polyimide Tubing, 14 AWG, 0.0641" ID, 0.0666" OD, 0.00125" Wall, 12" Length (Pack of 50) Reviews

Other Picture

When thin walls, tight tolerances and high strength are required, polyimide is the material of choice. Polyimide is in the select group of super polymers and is now available in micro and miniature tubing sizes. Our tubing has a thermal rating of -452F (-269C) To 700F (371C) for continuous use application with a dielectric constant of 3.4. This material is considered a benchmark for polymers in electrical insulation applications. This tubing exhibits exceptional dimensional stability and has very high burst pressure ratings. Excellent column strength and high stiffness has proven to provide good push and torque properties making polyimide tubing an excellent choice for catheters that are guided through the body's vascular system. Other uses include high strength, temperature and chemical resistant push rod tubes, and miniature structural matrices. This tubing can be steam, gamma or EtO sterilized and has excellent chemical resistance. Polyimide tubing can be bonded with cyanoacrylates, UV and room temperature cure epoxies.

Visit Store Now !!

Detail Products

• Translucent Amber PEEK Tubing, 24 AWG, 0.020" ID, 0.024" OD, 0.002" Wall, 72" Length
• Stainless Steel 304 Hypodermic Round Tubing, 18 Gauge, 0.05" OD, 0.033" ID, 0.0085" Wall, 60" Length
• Stainless Steel 316 Hypodermic Tubing, 30 Gauge, 0.012" OD, 0.006" ID, 0.003" Wall, 12" Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.017" Diameter, 72" Length (Pack of 1)
• White Translucent Miniature PTFE Tubing, 30 AWG, 0.010" ID, 0.016" OD, 0.0030" Wall, 72" Length

Detail Reviews

Oct 19, 2011 02:11:04

Polyimide Micro Tubing .0253" ID x .0273" OD x +/-.00025" Wall, USP Class VI 72" Length

Polyimide Micro Tubing .0253" ID x .0273" OD x +/-.00025" Wall, USP Class VI 72" Length Reviews

Other Picture

Polyimide Micro Tubing .0253" ID x .0273" OD x +/-.00025" Wall, USP Class VI 72" Length Feature

• Super High Temperature Rating 700 F
• Micro Sizes
• Dielectric constant of 3.4
• USP Class VI
• ETO, Gamma, Steam Sterilizable

When thin walls, tight tolerances and high strength are required, Polyimide is the material of choice. Polyimide is in the select group of super polymers and is now available in micro and miniature tubing sizes from Small Parts. Our tubing has a thermal rating of -452F (-269C) To 700F (371C) for continuous use application with a dielectric constant of 3.4. This material is considered a benchmark for polymers in electrical insulation applications. This tubing exhibits exceptional dimensional stability and has very high burst pressure ratings. Excellent column strength and high stiffness has proven to provide good push and torque properties making polyimide tubing an excellent choice for catheters that are guided through the body's vascular system. Other uses include high strength, temperature and chemical resistant push rod tubes, and miniature structural matrices. This tubing can be steam, gamma or EtO sterilized and has excellent chemical resistance. Polyimide tubing can be bonded with cyanoacrylates, UV and room temperature cure epoxies.

Visit Store Now !!

Detail Products

Detail Reviews

Oct 17, 2011 21:59:06

Translucent Amber Miniature Polyimide Tubing, 35 AWG, 0.0056" ID, 0.0101" OD, 0.00225" Wall, 30" Length

Translucent Amber Miniature Polyimide Tubing, 35 AWG, 0.0056" ID, 0.0101" OD, 0.00225" Wall, 30" Length Reviews

Other Picture

When thin walls, tight tolerances and high strength are required, polyimide is the material of choice. Polyimide is in the select group of super polymers and is now available in micro and miniature tubing sizes. Our tubing has a thermal rating of -452F (-269C) To 700F (371C) for continuous use application with a dielectric constant of 3.4. This material is considered a benchmark for polymers in electrical insulation applications. This tubing exhibits exceptional dimensional stability and has very high burst pressure ratings. Excellent column strength and high stiffness has proven to provide good push and torque properties making polyimide tubing an excellent choice for catheters that are guided through the body's vascular system. Other uses include high strength, temperature and chemical resistant push rod tubes, and miniature structural matrices. This tubing can be steam, gamma or EtO sterilized and has excellent chemical resistance. Polyimide tubing can be bonded with cyanoacrylates, UV and room temperature cure epoxies.

Visit Store Now !!

Detail Products

• Translucent Amber PEEK Tubing, 6 AWG, 0.162" ID, 0.167" OD, 0.0025" Wall, 48" Length
• Stainless Steel 304 Hypodermic Round Tubing, 18 Gauge, 0.05" OD, 0.033" ID, 0.0085" Wall, 60" Length
• Stainless Steel 316 Hypodermic Round Tubing, 16 Gauge, 0.0650" OD, 0.047" ID, 0.009" Wall, 60" Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.017" Diameter, 72" Length (Pack of 1)
• White Translucent Miniature PTFE Tubing, 30 AWG, 0.010" ID, 0.016" OD, 0.0030" Wall, 72" Length

Detail Reviews

Oct 16, 2011 04:19:09

FEP tubing, 1/32"ID x 1/16"OD, 25 ft/pack

FEP tubing, 1/32"ID x 1/16"OD, 25 ft/pack Reviews

Other Picture

FEP tubing, 1/32"ID x 1/16"OD, 25 ft/pack Feature

• FEP Tubing
• Product Type: Nominal Tubing
• Working pressure (psi): 500
• Maximum temperature (° F): 400
• Minimum temperature (° F): -454
• Certifications: FDA, USP, GMP
• Tubing ID (mm): 0.76
• Tubing ID (inches): 0.03
• Tubing OD (inches): 0.0625
• Tubing OD (mm): 1.6
• Wall thickness: 1/64" (0.4mm)
• Max psi: 500
• Translucent: Yes
• Sterilizable: Yes
• Color: Translucent
• Feet per pack: 25
• Tubing formulation: PTFE
• Manufacturer number: 50389
• Brand: Cole-Parmer
• Part Number: AO-06406-60
• Package Quantity: PACKAGE

Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. Excellent for the transfer of extreme temperature or highly corrosive materials. Also good for high-purity work. Characteristics: Chemically inert, nontoxic, heat resistant, with a low coefficient of friction. Doesn't deteriorate with age. Tough, but bends even at -454degF (-270degC). Translucent. Certification: Resin is FDA-compliant (21 CFR 177.1550); meets USP Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -454 to 400degF (-270 to 205degC) Sterilize: With autoclave, ethylene oxide, or use dry heat.

Visit Store Now !!

Detail Products

Detail Reviews

Oct 12, 2011 18:52:20