Black Viton Firm Tubing, 1/8" ID, 1/4" OD, 1/16" Wall, 10' Length

Black Viton Firm Tubing, 1/8" ID, 1/4" OD, 1/16" Wall, 10' Length Reviews

Other Picture

This is a high performance synthetic rubber with excellent temperature resistance, -10 F to 400 F (-23 C to 204 C) continuously. Viton offers the widest range of fluid and chemical resistance of any commercial rubber. Excellent resistance to oils, fuels, lubricants and most mineral acids. Applications include fuel and oil lines, cable jacketing, solvents, chemical lines, hot lubrication, seals O-Rings. Standard barbed fittings and hose clamps are recommended for most applications. Durometer : 75A. Made with Viton Type A.

Visit Store Now !!

Detail Products

• Black Viton Soft Tubing, 3/16" ID, 5/16" OD, 1/16" Wall, 1' Length

Detail Reviews

Apr 01, 2011 03:33:04

Zeus PTFE (Teflon) Tube Thin Wall 3/8 Gauge 10' Length Coil or Spool

Zeus PTFE (Teflon) Tube Thin Wall 3/8 Gauge 10' Length Coil or Spool Reviews

Other Picture

Zeus PTFE (Teflon) Tube Thin Wall 3/8 Gauge 10' Length Coil or Spool Feature

• Biocompatible USP Class VI
• Flame Resistant UL 94 VO
• -454 to 500 Degrees
• Limiting Oxygen Index Greater Than 95
• ETO and Autoclave Sterilizable

PTFE (Polytetrafluoroethylene), Sometimes referred to as Teflon is lightweight, semi flexible, and is used for a variety of laboratory applications. Heat resistant to 500 Degrees F (260 Degrees C) continuous. Highly valued for its toughness and insulating qualities, as well as high dielectric strength over a wide range of frequencies.ETO and Autoclave sterilization. Non absorbent to water and unaffected by acids and alkali's. Should not be heated to temperatures above 752 Degrees F (400 Degrees C). Color: White Translucent Natural.

Visit Store Now !!

Detail Products

• Zeus FEP Heat Shrink Tubing, 2 Gauge, 0.0 12" Wall, Heat Shrink Rat 1.13:1 48" Length (Pack of 5)

Detail Reviews

Mar 31, 2011 03:36:03

Black Polyethylene (LLDPE) Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 25' Length

Black Polyethylene (LLDPE) Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 25' Length Reviews

Other Picture

Linear Low Density Polyethylene(LLDPE) Tubing offers enhanced resistance to stress cracking. Chemically inert; forms a good barrier to gases, vapors, and moisture. Does not impart a taste or odor. Made from non-toxic, 100 percent virgin-grade raw materials conforming to FDA standards. Low density is listed by the National Sanitation Foundation (NSF 51). Flexible, lightweight, durable and good dielectric properties.

Visit Store Now !!

Detail Products

• Blue Polyethylene (LLDPE) Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 10' Length
• Scotch TL901 Thermal Laminator 2 Roller System
• SANYO eneloop 4 Pack AA NiMH Pre-Charged Rechargeable Batteries
• 6 Inch LCD Digital Caliper with Extra Battery and Case

Detail Reviews

Mar 29, 2011 17:13:17

Black Viton Soft Tubing, 3/16" ID, 7/16" OD, 1/8" Wall, 10' Length

Black Viton Soft Tubing, 3/16" ID, 7/16" OD, 1/8" Wall, 10' Length Reviews

Other Picture

Made of 100 percent pure Type B Viton, a high performance synthetic rubber. Specifically deisgned for use with peristaltic pumps, this tubing has excellent temperature resistance with an operating range of -40 F to 400 F continuously; 600 F periodically. It also offers the widest range of fluid and chemical resistance of any commercial rubber - oils, fuels, lubricants, most mineral acids, also resistant to many aliphatic and aromatic hydrocarbons such as carbon tetrachloride, benzene, toluene, and xylene. Viton has excellent resistance to environmental exposure such as sunlight and ozone. Other applications include fuel and oil lines, cable jacketing, solvents, chemical lines, hot lubrication, seals, and o-rings.

Visit Store Now !!

Detail Products

• White SiliconeTubing, 3/16"ID, 5/16"OD, 1/16" Wall, 10' Length
• Black Viton Firm Tubing, 1/16" ID, 1/8" OD, 1/32" Wall, 10' Length
• La Crosse Technology BC-700 Alpha Power Battery Charger

Detail Reviews

Mar 28, 2011 15:27:05

White Translucent Miniature PTFE Tubing, 38 AWG, 0.004" ID, 0.008" OD, 0.002" Wall, 36" Length

White Translucent Miniature PTFE Tubing, 38 AWG, 0.004" ID, 0.008" OD, 0.002" Wall, 36" Length Reviews

Other Picture

PTFE is the purest, most inert material in the fluoropolymer family. The unique properties of PTFE (sometimes known as Teflon) has made it the polymer of choice in many advanced applications. With the lowest coefficient of friction of any polymer and an extremely broad temperature range (-454 Degrees F to 500 Degrees F), PTFE has been designed into products from advanced medical devices to high temperature industrial equipment. Because of its unparalleled chemical resistance and excellent chemical inertness, PTFE has become the benchmark plastic for the chemical, bio-medical and analytical sciences industries. Small Parts Inc.stocks these miniature thin wall sizes that you probably wont find anywhere else.

Visit Store Now !!

Detail Products

• Translucent Amber PEEK Tubing, 36 AWG, 0.005" ID, 0.011" OD, 0.0030" Wall, 72" Length
• Translucent Amber Miniature Polyimide Tubing, 25 AWG, 0.0179" ID, 0.0239" OD, 0.0030" Wall, 12" Length (Pack of 10)
• Zeus PTFE (Teflon) Sublite Wall Tubing 42 AWG .025" ID x .002" Wall 48" Length
• Zeus PTFE (Teflon) Tube Thin Wall 24 Gauge 10' Length Coil or Spool
• TRENDnet USB to Serial Converter TU-S9 (Blue)

Detail Reviews

Mar 27, 2011 06:32:04

Polyimide Triple Wall Tubing AWG 12, .0808" ID x .0030 WL, .0868" OD, 72" L, USP Class VI

Polyimide Triple Wall Tubing AWG 12, .0808" ID x .0030 WL, .0868" OD, 72" L, USP Class VI Reviews

Other Picture

Polyimide Triple Wall Tubing AWG 12, .0808" ID x .0030 WL, .0868" OD, 72" L, USP Class VI Feature

• Super High Temperature Rating 700 F
• Micro Sizes
• Dielectric constant of 3.4
• USP Class VI
• ETO, Gamma, Steam Sterilizable

When thin walls, tight tolerances and high strength are required, Polyimide is the material of choice. Polyimide is in the select group of super polymers and is now available in micro and miniature tubing sizes from Small Parts. Our tubing has a thermal rating of -452F (-269C) To 700F (371C) for continuous use application with a dielectric constant of 3.4. This material is considered a benchmark for polymers in electrical insulation applications. This tubing exhibits exceptional dimensional stability and has very high burst pressure ratings. Excellent column strength and high stiffness has proven to provide good push and torque properties making polyimide tubing an excellent choice for catheters that are guided through the body's vascular system. Other uses include high strength, temperature and chemical resistant push rod tubes, and miniature structural matrices. This tubing can be steam, gamma or EtO sterilized and has excellent chemical resistance. Polyimide tubing can be bonded with cyanoacrylates, UV and room temperature cure epoxies.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 25, 2011 14:32:03

PVC Square Profile Pipe, 3.54" x 3.54", 0.078" Wall

PVC Square Profile Pipe, 3.54" x 3.54", 0.078" Wall Reviews

Other Picture

PVC Square Profile Pipe, 3.54" x 3.54", 0.078" Wall Feature

• Corrosion Resistant
• Limited Solvent Bondability
• Excellent Wet Applications
• Agricultural and Marine
• NSF 1,14 & 61, UL94 VO

These PVC square profiles are corrosion resistant and heat resistant to 158F. These profiles are used for light structural duty in wet industrial environments, agricultural settings, and in the marine industry. Excellent corrosion resistance makes them an ideal material to use in plants handling various chemicals where metal can be replaced without sacrificing structural integrity. Solvent resistance is limited and not recommended for direct contact.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 24, 2011 18:57:05

White SiliconeTubing, 1/8"ID, 3/8"OD, 1/8"Wall, 10' Length

White SiliconeTubing, 1/8"ID, 3/8"OD, 1/8"Wall, 10' Length Reviews

Other Picture

Silicone rubber is able to resist extreme temperature variances, from -150 Deg F to 500 Deg F (-101C to 260C), and has a natural translucent color for visual flow. Resists U.V. ozone gases, moisture and temperature. Resilient, stretchable and resistant to compression set and is odorless, tasteless and inert. Silicone is extremely resistant to ozone and corona concentration over long time periods. It also has good electrical properties, along with the ability to self-extinguish typically within 3 -8 seconds, making silicone an excellent choice for appliance and computer applications. It contains no sulphur or other acid-producing chemicals so it does not cause staining, corrosion or deterioration of other materials it contacts. Standard barbed fittings and lined hose clamps are recommended for most applications. Durometer reading: 50A.

Visit Store Now !!

Detail Products

• Translucent Tygon Versilic SPX-50 Silicone Tubing, 3/8" ID, 1/2" OD, 1/16" Wall, 10' Length
• White Translucent Medical Grade SiliconeTubing, 0.063" ID, 0.188" OD, 0.063" Wall, 10' Length
• InSinkErator SST-FLTR 2/3-Gallon Stainless Tank and Filtration System
• Bel-Art, Scienceware, 371100001, Spinbar, Stirring Bar, Teflon, Octagon, 1"X5/16"
• Clear PVC Tubing, 1/4" ID, 7/16" OD, 3/32" Wall, 25' Length

Detail Reviews

Mar 23, 2011 04:25:03

Red Polyethylene (LLDPE) Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 100' Length

Red Polyethylene (LLDPE) Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 100' Length Reviews

Other Picture

Linear Low Density Polyethylene(LLDPE) Tubing offers enhanced resistance to stress cracking. Chemically inert; forms a good barrier to gases, vapors, and moisture. Does not impart a taste or odor. Made from non-toxic, 100 percent virgin-grade raw materials conforming to FDA standards. Low density is listed by the National Sanitation Foundation (NSF 51). Flexible, lightweight, durable and good dielectric properties.

Visit Store Now !!

Detail Products

• Green Polyethylene (LLDPE) Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 25' Length
• Yellow Polyethylene (LLDPE) Tubing, 0.170" ID, 0.250" OD, 0.040" Wall, 100' Length
• Blue Polyethylene (LLDPE) Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 10' Length

Detail Reviews

Mar 22, 2011 04:07:04

Translucent Amber Miniature Polyimide Tubing, 14 AWG, 0.0641" ID, 0.0716" OD, 0.00375" Wall, 12" Length (Pack of 2)

Translucent Amber Miniature Polyimide Tubing, 14 AWG, 0.0641" ID, 0.0716" OD, 0.00375" Wall, 12" Length (Pack of 2) Reviews

Other Picture

When thin walls, tight tolerances and high strength are required, polyimide is the material of choice. Polyimide is in the select group of super polymers and is now available in micro and miniature tubing sizes. Our tubing has a thermal rating of -452F (-269C) To 700F (371C) for continuous use application with a dielectric constant of 3.4. This material is considered a benchmark for polymers in electrical insulation applications. This tubing exhibits exceptional dimensional stability and has very high burst pressure ratings. Excellent column strength and high stiffness has proven to provide good push and torque properties making polyimide tubing an excellent choice for catheters that are guided through the body's vascular system. Other uses include high strength, temperature and chemical resistant push rod tubes, and miniature structural matrices. This tubing can be steam, gamma or EtO sterilized and has excellent chemical resistance. Polyimide tubing can be bonded with cyanoacrylates, UV and room temperature cure epoxies.

Visit Store Now !!

Detail Products

• Stainless Steel 304 Hypodermic Round Tubing, 10 Gauge, 0.1340" OD, 0.114" ID, 0.01" Wall, 48" Length
• Translucent Amber PEEK Tubing, 20 AWG, 0.032" ID, 0.036" OD, 0.002" Wall, 24" Length
• Stainless Steel 316 Hypodermic Round Tubing, 15 Gauge, 0.0720" OD, 0.054" ID, 0.009" Wall, 60" Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.042" Diameter, 72" Length (Pack of 1)
• Tan PEEK Tubing, 0.093" ID, 0.125" OD, 0.016" Wall, 10' Length

Detail Reviews

Mar 20, 2011 20:18:17

PVC NSF-61 Square Tubing, Gray, 3.54" X 3.54", 0.078" Wall, 24" Length

PVC NSF-61 Square Tubing, Gray, 3.54" X 3.54", 0.078" Wall, 24" Length Reviews

Other Picture

PVC NSF-61 Square Tubing, Gray, 3.54" X 3.54", 0.078" Wall, 24" Length Feature

• Corrosion Resistant
• Limited Solvent Bondability
• Excellent Wet Applications
• Agricultural and Marine
• NSF 1,14 & 61, UL94 VO

These PVC square profiles are corrosion resistant and heat resistant to 158F. These profiles are used for light structural duty in wet industrial environments, agricultural settings, and in the marine industry. Excellent corrosion resistance makes them an ideal material to use in plants handling various chemicals where metal can be replaced without sacrificing structural integrity. Solvent resistance is limited and not recommended for direct contact.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 19, 2011 20:56:05

Tan Tygon Pharmed BPT Tubing, 1/4" ID, 3/8" OD, 1/16" Wall, 25' Length

Tan Tygon Pharmed BPT Tubing, 1/4" ID, 3/8" OD, 1/16" Wall, 25' Length Reviews

Other Picture

PharMed BPT Tubing is for use in peristaltic pumps and is less permeable to gases and vapors than silicone tubing. It is ideal for cell culture, fermentation, synthesis, separation, purification and process monitoring and control. PharMed BPT tubing is ideal for use in clean-in-place and steam-in-place cleaning and sterilization systems. It is compatible with virtually all commercial cleaners and sanitizers and can be repeatedly autoclaved for up to five cycle times, without affecting overall service life.

Visit Store Now !!

Detail Products

• Clear Tygon Micro Bore PVC Tubing, 0.020" ID, 0.060" OD, 0.020" Wall, 25' Length

Detail Reviews

Mar 19, 2011 00:44:03

Translucent Amber PEEK Tubing, 6 AWG, 0.162" ID, 0.167" OD, 0.0025" Wall, 48" Length

Translucent Amber PEEK Tubing, 6 AWG, 0.162" ID, 0.167" OD, 0.0025" Wall, 48" Length Reviews

Other Picture

The combination of PEEK material, thin walls and large size range (from miniature .007" to .335") make for a product development dream. PEEKs inherent purity and lubricity make it an ideal choice for analytical and life sciences applications. Its continuous operating temperature of 500 degrees F coupled with the tough, abrasion resistance and stiff properties yield a truly unique tubing used as a conduit for fluids, gasses, fiber optics and wire. The tubing may also be fastened into mechanical matrices yielding strong, lightweight, high temperature chemically-resistant structures. With the exception of concentrated sulphuric acid or nitric acids, PEEK is extremely resistant to a wide range of chemical environments even at elevated temperatures. PEEK is a highly crystalline thermoplastic that will withstand multiple sterilizations from all known methods. Material is made from USP Class VI material. Color is tan.

Visit Store Now !!

Detail Products

• Translucent Amber Miniature Polyimide Tubing, 30 AWG, 0.0100" ID, 0.0145" OD, 0.00225" Wall, 30" Length
• White Translucent Miniature PTFE Tubing, 22 AWG, 0.025" ID, 0.029" OD, 0.002" Wall, 72" Length
• Stainless Steel 304 Hypodermic Round Tubing, 10 Gauge, 0.1340" OD, 0.114" ID, 0.01" Wall, 48" Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.028" Diameter, 72" Length (Pack of 1)
• Tan PEEK Tubing, 0.093" ID, 0.125" OD, 0.016" Wall, 10' Length

Detail Reviews

Mar 18, 2011 05:09:03