Kapton (Polyimide)Tubing 1.00" ID x .007" Wall 24" Length

Kapton (Polyimide)Tubing 1.00" ID x .007" Wall 24" Length Reviews

Other Picture

Kapton (Polyimide)Tubing 1.00" ID x .007" Wall 24" Length Feature

• Temperature Range -269 to +400 F
• Dielectric Strength at 25C = 7000 VPM
• Moisture Absorption at 23.5C , 50pc RH 1.3pc
• Flammability Self Extinguishing
• Volume Resistivity ohm/cm. at 200C 1.0 x 1016

Kapton(R) polyimide film is an extremely strong, spiral wound transparent amber film that retains its high dielectric strength over a very wide range of temperatures. It remains flexible at liquid helium temperature minus 269 Degrees C and does not lose its strength until it reaches a temperature of 815 Degrees C. The maximum tubing temperature indicated in the properties chart is lower since the sealing agent used in the spiral winding process to produce Kapton(R) tubing limits its high temperature usage. Tubing made of Kapton(R) offers a rare combination of a high dielectric strength within an extreme temperature range. Kapton(R) is flame resistant and begins to char only above 800 Degrees C. It does not melt and is self extinguishing. It has excellent mechanical properties and is practically unaffected by moisture. There is no known organic solvent for Kapton(R). Due to the spiral winding process this tubing is not recommended for pressure applications however liquids and gasses may be conveyed in it. It is classified in the Superpolymer category of plastics and the benchmark for electrical and thermal insulation.

Visit Store Now !!

Detail Products

Detail Reviews

May 31, 2011 22:50:21

Yellow Polyethylene (LLDPE) Tubing, 0.170" ID, 0.250" OD, 0.040" Wall, 100' Length

Yellow Polyethylene (LLDPE) Tubing, 0.170" ID, 0.250" OD, 0.040" Wall, 100' Length Reviews

Other Picture

Linear Low Density Polyethylene(LLDPE) Tubing offers enhanced resistance to stress cracking. Chemically inert; forms a good barrier to gases, vapors, and moisture. Does not impart a taste or odor. Made from non-toxic, 100 percent virgin-grade raw materials conforming to FDA standards. Low density is listed by the National Sanitation Foundation (NSF 51). Flexible, lightweight, durable and good dielectric properties.

Visit Store Now !!

Detail Products

• Green Polyethylene (LLDPE) Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 10' Length
• Red Polyethylene (LLDPE) Tubing, 0.170" ID, 0.250" OD, 0.040" Wall, 100' Length

Detail Reviews

May 30, 2011 23:41:05

White Translucent Nylon 101 Round Tubing, 1/4" OD, 1/8" ID, 48" Length

White Translucent Nylon 101 Round Tubing, 1/4" OD, 1/8" ID, 48" Length Reviews

Other Picture

White Translucent Nylon 101 Round Tubing, 1/4" OD, 1/8" ID, 48" Length Feature

• Nominal Tolerances: O.D. on plus side up to .040"
• Nominal Tolerances: I.D. on minus side up to .040"

Nylon's combination of mechanical properties, excellent wear, abrasion resistance and weight, make it an excellent replacement for metals and bronze parts. Nylon is 1/8 the weight of bronze, yet it is easier to handle and maintain than metals. Nylon has a proven record of outstanding service in a wide range of parts for all industries. It is easy to fabricate using standard metal working equipment.

Visit Store Now !!

Detail Products

Detail Reviews

May 29, 2011 06:46:04

Yellow Tygon F-4040-A Fuel Tubing, 5/8" ID, 7/8" OD, 1/8" Wall, 5' Length

Yellow Tygon F-4040-A Fuel Tubing, 5/8" ID, 7/8" OD, 1/8" Wall, 5' Length Reviews

Other Picture

Tygon fuel and lubrication tubing is formulated to resist hydrocarbons and has a lower rate of permeation than competitive tubing. It resists the swelling and hardening caused by hydrocarbon based fluids which can lead to cracking and leakage. Its minimum extractability safeguards the liquid or vapor being transferred against contamination. Typical applications include small engine fuel lines, general automotive, lawn and garden equipment, coolant transfer, heating fuels, cutting compounds, and lubrication lines. Durometer hardness is 57 Shore A. Temperature Range is -35F to 165F. Color is transparent yellow for easy identification.

Visit Store Now !!

Detail Products

• Du-Bro 799 3/32" x 3' I.D. Tygon Tubing
• Campbell Hausfeld MP6000 Tire Inflator with Gauge
• Volleyball Knee Pads
• Windows 7 PRO 64 Bit System Builder 1pk [Old Version]
• Reliance Products Double Doodie Toilet Waste Bags (6-Pack)

Detail Reviews

May 28, 2011 02:36:05

Black Nylon 12 Flexible Metric Tubing, 4mm ID, 6mm OD, 1mm Wall, 10' Length

Black Nylon 12 Flexible Metric Tubing, 4mm ID, 6mm OD, 1mm Wall, 10' Length Reviews

Other Picture

Nylon 12 Metric Tubing offers very low moisture absorption and will not become brittle or swell because of water. Excellent resistance to flexural fatigue, tube vibration and movement. Nylon 12 tubing is lightweight and posses outstanding bend radii and pressure ratings. It is also resistant to crushing, abrasion and cracking.

Visit Store Now !!

Detail Products

• Stainless Steel 18-8 Machine Screw, Flat Head, Phillips Drive, MIL-SPEC, #8-32, 5/8" Length (Pack of 25)
• Stainless Steel 304 Hypodermic Round Tubing, 25 Gauge, 0.0203" OD, 0.01" ID, 0.005" Wall, 60" Length (Pack of 5)
• Brass C260 Square Tubing, 1/16" x 1/16", 0.014" Wall, 36" Length
• -273 Buna O-Ring, 70A Durometer, Black, 9-3/4" ID, 10" OD, 1/8" Width (Pack of 1)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #0-80, 1/4" Length (Pack of 100)

Detail Reviews

May 27, 2011 03:15:05

White Translucent Nylon 101 Round Tubing, 3/8" OD, 5/16" ID, 12" Length

White Translucent Nylon 101 Round Tubing, 3/8" OD, 5/16" ID, 12" Length Reviews

Other Picture

White Translucent Nylon 101 Round Tubing, 3/8" OD, 5/16" ID, 12" Length Feature

• Nominal Tolerances: O.D. on plus side up to .040"
• Nominal Tolerances: I.D. on minus side up to .040"

Nylon's combination of mechanical properties, excellent wear, abrasion resistance and weight, make it an excellent replacement for metals and bronze parts. Nylon is 1/8 the weight of bronze, yet it is easier to handle and maintain than metals. Nylon has a proven record of outstanding service in a wide range of parts for all industries. It is easy to fabricate using standard metal working equipment.

Visit Store Now !!

Detail Products

Detail Reviews

May 26, 2011 00:27:04

Green Polyurethane Tubing, 0.125" ID, 0.250" OD, 0.063" Wall, 100' Length

Green Polyurethane Tubing, 0.125" ID, 0.250" OD, 0.063" Wall, 100' Length Reviews

Other Picture

Superthane Pneumatic Tubing is manufactured from hydrolysis-resistant polyurethane to withstand moisture, humidity, and fungi. Its natural flexibility allows for tight bending in and around equipment, making it a good choice for pneumatic control, automated machinery, robotics, lubrication lines, fluid circuitry, and instrumentation applications. Produced from ether-based polyurethane material, Superthane Pneumatic Tubing does not contain any plasticizers, ingredients used to impart flexibility, that can leach out and cause flow contamination. The tubing resists radiation exposure, kinking, tearing, abrasion, and impact, in addition to moisture. Superthane Pneumatic Tubing offers excellent cold temperature flexibility and virtually unlimited flexural life. It may be used at temperatures ranging from -90F to 175F. Superthane Pneumatic Tubing is a durable product manufactured to resist more pressure or vacuum than corresponding sizes of PVC or rubber.

Visit Store Now !!

Detail Products

• Red Polyurethane Tubing, 0.125" ID, 0.250" OD, 0.063" Wall, 100' Length

Detail Reviews

May 25, 2011 00:24:05

Translucent Amber Miniature Polyimide Tubing, 25 AWG, 0.0179" ID, 0.0199" OD, 0.0010" Wall, 12" Length (Pack of 10)

Translucent Amber Miniature Polyimide Tubing, 25 AWG, 0.0179" ID, 0.0199" OD, 0.0010" Wall, 12" Length (Pack of 10) Reviews

Other Picture

When thin walls, tight tolerances and high strength are required, polyimide is the material of choice. Polyimide is in the select group of super polymers and is now available in micro and miniature tubing sizes. Our tubing has a thermal rating of -452F (-269C) To 700F (371C) for continuous use application with a dielectric constant of 3.4. This material is considered a benchmark for polymers in electrical insulation applications. This tubing exhibits exceptional dimensional stability and has very high burst pressure ratings. Excellent column strength and high stiffness has proven to provide good push and torque properties making polyimide tubing an excellent choice for catheters that are guided through the body's vascular system. Other uses include high strength, temperature and chemical resistant push rod tubes, and miniature structural matrices. This tubing can be steam, gamma or EtO sterilized and has excellent chemical resistance. Polyimide tubing can be bonded with cyanoacrylates, UV and room temperature cure epoxies.

Visit Store Now !!

Detail Products

• Stainless Steel 304 Hypodermic Round Tubing, 25 Gauge, 0.0203" OD, 0.01" ID, 0.005" Wall, 60" Length (Pack of 5)
• Translucent Amber PEEK Tubing, 18 AWG, 0.040" ID, 0.043" OD, 0.0015" Wall, 72" Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.005" Diameter, 36" Length (Pack of 5)
• Stainless Steel 316 Hypodermic Round Tubing, 13 Gauge, 0.0950" OD, 0.071" ID, 0.012" Wall, 60" Length
• Tan PEEK Tubing, 0.030" ID, 0.062" OD, 0.016" Wall, 3' Length

Detail Reviews

May 24, 2011 02:02:04

Clear NSF-61 Polyurethane Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 25' Length

Clear NSF-61 Polyurethane Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 25' Length Reviews

Other Picture

Superthane ether-based polyurethane tubing is clear, flexible, resistant to oils, greases and fuels, resistant to weathering, tearing, impact, radiation and abrasion, and can withstand a temperature range of -90 Deg F to 175 Deg F. It contains no plasticizer that can cause flow contamination or tube hardening and is manufactured from FDA-sanctioned ingredients for use with wet and fatty food contact surfaces. Ether-based material is listed by the National Sanitation Foundation (NSF 61). This tubing can be heat sealed, coiled, fabricated or bonded. Common Applications: Granular Transfer Lines, Grease Lines, Insulating Sleeves, Metering Pumps, Nuclear Power Facilities, Oxygen and Other Gas Lines, Pressure Measuring Devices, Robotics, Slurry Transfer, Small Motor Fuel Lines, Transfer Lines for Clean Liquids, Transfer Lines for Internal Contamination Fluids, Vacuum Equipment

Visit Store Now !!

Detail Products

• Clear Polyurethane Tubing, 0.170" ID, 0.250" OD, 0.040" Wall, 10' Length
• Clear Tygon S-50-HL Medical Tubing, 1/32" ID, 3/32" OD, 1/32" Wall, 10' Length
• Clear Tygon Micro Bore PVC Tubing, 0.020" ID, 0.060" OD, 0.020" Wall, 25' Length
• Arduino UNO board
• SE Clip Test Lead Set (10 Piece)

Detail Reviews

May 23, 2011 05:38:03

White Translucent Medical Grade SiliconeTubing, 0.375" ID, 0.500" OD, 0.063" Wall, 10' Length

White Translucent Medical Grade SiliconeTubing, 0.375" ID, 0.500" OD, 0.063" Wall, 10' Length Reviews

Other Picture

Silicon Med-X platinum-cured medical grade silicone tubing is manufactured under strict manufacturing procedures in a controlled environment. Silicone elastomer meets USP Class VI requirements. Platinu- cured for the highest degree of purity (least extractable), non-reactive to body tissues and fluids. It is also reusable and will withstand repeated sterilization. Some common applications: Beverage, Blood & Fluid Handling, Dialysis, Food, I.V. Administration, Laboratory, Medical, Personal Care, Pharmaceutical, Surgical Drains.

Visit Store Now !!

Detail Products

• White SiliconeTubing, 1/8"ID, 3/16"OD, 1/32" Wall, 10' Length
• Translucent Tygon Versilic SPX-50 Silicone Tubing, 1/32" ID, 3/32" OD, 1/32" Wall, 10' Length
• Clear Tygon S-50-HL Medical Tubing, 1/32" ID, 3/32" OD, 1/32" Wall, 10' Length
• Scotch Precision Scissor, 8-Inches (1448)
• -228 Silicone O-Ring, 70A Durometer, Red, 2-1/4" ID, 2-1/2" OD, 1/8" Width (Pack of 10)

Detail Reviews

May 22, 2011 01:13:03

Braid Reinforced Silicone Tubing, 1/2" 1' Length

Braid Reinforced Silicone Tubing, 1/2" 1' Length Reviews

Other Picture

Braid Reinforced Silicone Tubing, 1/2" 1' Length Feature

• NSF 51
• High Temperature
• High Pressure
• Autoclavable
• Peroxide Cured

Braid reinforced silicone hose resists UV, ozone, gases, moisture and high temperature. Translucent natural color for visual observation. Odorless, tasteless and inert. It is a peroxide cured product and contains no sulphur or acid producing chemicals. May be steam sterilized with limited cycles. Maximum operating temperature is 350 F.

Visit Store Now !!

Detail Products

• White SiliconeTubing, 1/8"ID, 3/16"OD, 1/32" Wall, 10' Length
• GAMO Assorted .177 Caliber Pellets (Combo Pack of 1000)

Detail Reviews

May 20, 2011 18:03:05

Yellow Tygon F-4040-A Fuel Tubing, 0.08" ID, 0.140" OD, 0.030" Wall, 50' Length

Yellow Tygon F-4040-A Fuel Tubing, 0.08" ID, 0.140" OD, 0.030" Wall, 50' Length Reviews

Other Picture

Tygon fuel and lubrication tubing is formulated to resist hydrocarbons and has a lower rate of permeation than competitive tubing. It resists the swelling and hardening caused by hydrocarbon based fluids which can lead to cracking and leakage. Its minimum extractability safeguards the liquid or vapor being transferred against contamination. Typical applications include small engine fuel lines, general automotive, lawn and garden equipment, coolant transfer, heating fuels, cutting compounds, and lubrication lines. Durometer hardness is 57 Shore A. Temperature Range is -35F to 165F. Color is transparent yellow for easy identification.

Visit Store Now !!

Detail Products

• Du-Bro 799 3/32" x 3' I.D. Tygon Tubing
• Campbell Hausfeld MP6000 Tire Inflator with Gauge
• Volleyball Knee Pads
• Windows 7 PRO 64 Bit System Builder 1pk [Old Version]
• K&N 99-5000 Aerosol Recharger Filter Care Service Kit

Detail Reviews

May 19, 2011 18:24:06

Clear Tygon B-44-3 Beverage Tubing, 1/4" ID, 3/8" OD, 1/16" Wall, 50' Length

Clear Tygon B-44-3 Beverage Tubing, 1/4" ID, 3/8" OD, 1/16" Wall, 50' Length Reviews

Other Picture

Tygon B443 Beverage Tubing is specially formulated for transferring a wide variety of beverages including soft drinks, fruit juices, flavored teas and bottled water. In virtually all cases, Tygon Beverage Tubing will not affect the taste or odor of product transferred through it, while its excellent non-wetting properties facilitate complete drainage and permit simple flush cleaning. Many of the unique properties inherent to Tygon Beverage Tubing also apply to a wide variety of complex applications ranging from fine cosmetic production to the dispensing of water based printing inks found in the publishing industry. The versatility and proven performance of Tygon Beverage Tubing have made it today's most widely specified clear, flexible plastic tubing. Lightweight and flexible for easy, quick installation, and broad chemical resistance to virtually all non solvent chemicals.

Visit Store Now !!

Detail Products

• Clear Tygon S-50-HL Medical Tubing, 1/32" ID, 3/32" OD, 1/32" Wall, 10' Length
• Clear Tygon R3603 Laboratory Tubing, 1/16" ID, 1/8" OD, 1/32" Wall, 50' Length
• Clear PVC Tubing, 1/4" ID, 1/2" OD, 1/8" Wall, 10' Length
• White SiliconeTubing, 1/8"ID, 3/16"OD, 1/32" Wall, 10' Length
• Yeast: The Practical Guide to Beer Fermentation (Brewing Elements Series)

Detail Reviews

May 18, 2011 02:17:03