Translucent Amber PEEK Tubing, 38 AWG, 0.004" ID, 0.008" OD, 0.002" Wall, 24" Length

Translucent Amber PEEK Tubing, 38 AWG, 0.004" ID, 0.008" OD, 0.002" Wall, 24" Length Reviews

Other Picture

The combination of PEEK material, thin walls and large size range (from miniature .007" to .335") make for a product development dream. PEEKs inherent purity and lubricity make it an ideal choice for analytical and life sciences applications. Its continuous operating temperature of 500 degrees F coupled with the tough, abrasion resistance and stiff properties yield a truly unique tubing used as a conduit for fluids, gasses, fiber optics and wire. The tubing may also be fastened into mechanical matrices yielding strong, lightweight, high temperature chemically-resistant structures. With the exception of concentrated sulphuric acid or nitric acids, PEEK is extremely resistant to a wide range of chemical environments even at elevated temperatures. PEEK is a highly crystalline thermoplastic that will withstand multiple sterilizations from all known methods. Material is made from USP Class VI material. Color is tan.

Visit Store Now !!

Detail Products

• Translucent Amber Miniature Polyimide Tubing, 28 AWG, 0.0126" ID, 0.0186" OD, 0.0030" Wall, 30" Length
• White Translucent Miniature PTFE Tubing, 8 AWG, 0.110" ID, 0.114" OD, 0.002" Wall, 72" Length
• Stainless Steel 304 Hypodermic Round Tubing, 11 Gauge, 0.1200" OD, 0.087" ID, 0.0165" Wall, 60" Length
• Tan PEEK Tubing, 0.040" ID, 0.062" OD, 0.011" Wall, 10' Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.011" Diameter, 72" Length (Pack of 1)

Detail Reviews

Jun 29, 2011 18:43:04

Translucent Amber Miniature Polyimide Tubing, 22 AWG, 0.0253" ID, 0.0313" OD, 0.0030" Wall, 12" Length (Pack of 2)

Translucent Amber Miniature Polyimide Tubing, 22 AWG, 0.0253" ID, 0.0313" OD, 0.0030" Wall, 12" Length (Pack of 2) Reviews

Other Picture

When thin walls, tight tolerances and high strength are required, polyimide is the material of choice. Polyimide is in the select group of super polymers and is now available in micro and miniature tubing sizes. Our tubing has a thermal rating of -452F (-269C) To 700F (371C) for continuous use application with a dielectric constant of 3.4. This material is considered a benchmark for polymers in electrical insulation applications. This tubing exhibits exceptional dimensional stability and has very high burst pressure ratings. Excellent column strength and high stiffness has proven to provide good push and torque properties making polyimide tubing an excellent choice for catheters that are guided through the body's vascular system. Other uses include high strength, temperature and chemical resistant push rod tubes, and miniature structural matrices. This tubing can be steam, gamma or EtO sterilized and has excellent chemical resistance. Polyimide tubing can be bonded with cyanoacrylates, UV and room temperature cure epoxies.

Visit Store Now !!

Detail Products

• Stainless Steel 304 Hypodermic Round Tubing, 11 Gauge, 0.1200" OD, 0.087" ID, 0.0165" Wall, 60" Length
• Translucent Amber PEEK Tubing, 34 AWG, 0.006" ID, 0.012" OD, 0.0030" Wall, 36" Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.005" Diameter, 36" Length (Pack of 5)
• Stainless Steel 316 Hypodermic Round Tubing, 16 Gauge, 0.0650" OD, 0.047" ID, 0.009" Wall, 60" Length
• Tan PEEK Tubing, 0.040" ID, 0.062" OD, 0.011" Wall, 10' Length

Detail Reviews

Jun 28, 2011 08:05:03

White Translucent Nylon 101 Round Tubing, 1/2" OD, 7/16" ID, 6" Length

White Translucent Nylon 101 Round Tubing, 1/2" OD, 7/16" ID, 6" Length Reviews

Other Picture

White Translucent Nylon 101 Round Tubing, 1/2" OD, 7/16" ID, 6" Length Feature

• Nominal Tolerances: O.D. on plus side up to .040"
• Nominal Tolerances: I.D. on minus side up to .040"

Nylon's combination of mechanical properties, excellent wear, abrasion resistance and weight, make it an excellent replacement for metals and bronze parts. Nylon is 1/8 the weight of bronze, yet it is easier to handle and maintain than metals. Nylon has a proven record of outstanding service in a wide range of parts for all industries. It is easy to fabricate using standard metal working equipment.

Visit Store Now !!

Detail Products

• Nylon 6/6 Shoulder Washer, 0.120" ID, 0.154" OD, 0.062" Thick, 0.291" Shoulder Diameter, 0.296" Length (Pack of 100)
• Brass Machine Screw, Round Head, Slotted Drive, #10-24, 7/8" Length (Pack of 25)
• Natural Nylon 12 Flexible Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 25' Length
• Black Polyethylene (LLDPE) Tubing, 0.170" ID, 0.250" OD, 0.040" Wall, 25' Length
• Grade 8 Yellow Chromate Alloy Steel Hex Bolt, 3/8"-24, 2-1/4" Length (Pack of 5)

Detail Reviews

Jun 27, 2011 07:23:05

Zeus PTFE (Teflon) Regular Wall Tubing 3 Gauge 10' Length Spool or Coil

Zeus PTFE (Teflon) Regular Wall Tubing 3 Gauge 10' Length Spool or Coil Reviews

Other Picture

Zeus PTFE (Teflon) Regular Wall Tubing 3 Gauge 10' Length Spool or Coil Feature

• Biocompatible USP Class VI
• Flame Resistant UL 94 VO
• -454 to 500 Degrees
• Limiting Oxygen Index Greater Than 95
• ETO and Autoclave Sterilizable

PTFE (Polytetrafluoroethylene), Sometimes referred to as Teflon is lightweight, semi flexible, and is used for a variety of laboratory applications. Heat resistant to 500 Degrees F (260 Degrees C) continuous. Highly valued for its toughness and insulating qualities, as well as high dielectric strength over a wide range of frequencies.ETO and Autoclave sterilization. Non absorbent to water and unaffected by acids and alkali's. Should not be heated to temperatures above 752 Degrees F (400 Degrees C). Color: White Translucent Natural.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 26, 2011 10:10:04

Porous Polyethylene Tubing 2.350" OD 25-40u Micron Pore Size 48" L

Porous Polyethylene Tubing 2.350" OD 25-40u Micron Pore Size 48" L Reviews

Other Picture

Porous Polyethylene Tubing 2.350" OD 25-40u Micron Pore Size 48" L Feature

• Wicking, Venting, Diffusing
• Filtration Media
• Depth Filtration
• Sterile Barrier Tortuous Path
• Aeration, foaming, sparging

Porous polyethylene tubes fit schedule 40 PVC fittings, are highly resilient, lightweight, and resistant to a broad spectrum of chemicals and reagents. The omni-directional, inter-connecting, open-celled pore structure of Porous Plastics can perform as a surface or depth filter; provide wicking of solutions by capillary action; venting or diffusing by controlled flow of gases; or act as a sterile barrier via controlled porosity and inherent tortuous path properties. Also used in aeration, foaming, agitation /sparging operations, and can be modified using conventional machining methods and in some cases hand tools.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 24, 2011 03:33:04

White Translucent Nylon 101 Round Tubing, 3/8" OD, 5/16" ID, 48" Length

White Translucent Nylon 101 Round Tubing, 3/8" OD, 5/16" ID, 48" Length Reviews

Other Picture

White Translucent Nylon 101 Round Tubing, 3/8" OD, 5/16" ID, 48" Length Feature

• Nominal Tolerances: O.D. on plus side up to .040"
• Nominal Tolerances: I.D. on minus side up to .040"

Nylon's combination of mechanical properties, excellent wear, abrasion resistance and weight, make it an excellent replacement for metals and bronze parts. Nylon is 1/8 the weight of bronze, yet it is easier to handle and maintain than metals. Nylon has a proven record of outstanding service in a wide range of parts for all industries. It is easy to fabricate using standard metal working equipment.

Visit Store Now !!

Detail Products

• Nylon 6/6 Shoulder Washer, 0.120" ID, 0.154" OD, 0.062" Thick, 0.291" Shoulder Diameter, 0.296" Length (Pack of 100)
• Brass Machine Screw, Round Head, Slotted Drive, #10-24, 7/8" Length (Pack of 25)
• Natural Nylon 12 Flexible Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 25' Length
• Black Polyethylene (LLDPE) Tubing, 0.170" ID, 0.250" OD, 0.040" Wall, 25' Length
• Grade 8 Yellow Chromate Alloy Steel Hex Bolt, 3/8"-24, 2-1/4" Length (Pack of 5)

Detail Reviews

Jun 22, 2011 22:42:04

Translucent Amber PEEK Tubing, 26 AWG, 0.016" ID, 0.022" OD, 0.0030" Wall, 72" Length

Translucent Amber PEEK Tubing, 26 AWG, 0.016" ID, 0.022" OD, 0.0030" Wall, 72" Length Reviews

Other Picture

The combination of PEEK material, thin walls and large size range (from miniature .007" to .335") make for a product development dream. PEEKs inherent purity and lubricity make it an ideal choice for analytical and life sciences applications. Its continuous operating temperature of 500 degrees F coupled with the tough, abrasion resistance and stiff properties yield a truly unique tubing used as a conduit for fluids, gasses, fiber optics and wire. The tubing may also be fastened into mechanical matrices yielding strong, lightweight, high temperature chemically-resistant structures. With the exception of concentrated sulphuric acid or nitric acids, PEEK is extremely resistant to a wide range of chemical environments even at elevated temperatures. PEEK is a highly crystalline thermoplastic that will withstand multiple sterilizations from all known methods. Material is made from USP Class VI material. Color is tan.

Visit Store Now !!

Detail Products

• Translucent Amber Miniature Polyimide Tubing, 21 AWG, 0.0285" ID, 0.0305" OD, 0.0010" Wall, 30" Length
• White Translucent Miniature PTFE Tubing, 8 AWG, 0.110" ID, 0.114" OD, 0.002" Wall, 72" Length
• Stainless Steel 304 Hypodermic Round Tubing, 18 Gauge, 0.0500" OD, 0.03" ID, 0.01" Wall, 60" Length
• Tan PEEK Tubing, 0.040" ID, 0.062" OD, 0.011" Wall, 10' Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.005" Diameter, 36" Length (Pack of 5)

Detail Reviews

Jun 22, 2011 01:47:04

Kapton (Polyimide)Tubing .375" ID x .005" Wall 72" Length

Kapton (Polyimide)Tubing .375" ID x .005" Wall 72" Length Reviews

Other Picture

Kapton (Polyimide)Tubing .375" ID x .005" Wall 72" Length Feature

• Temperature Range -269 to +400 F
• Dielectric Strength at 25C = 7000 VPM
• Moisture Absorption at 23.5C , 50pc RH 1.3pc
• Flammability Self Extinguishing
• Volume Resistivity ohm/cm. at 200C 1.0 x 1016

Kapton(R) polyimide film is an extremely strong, spiral wound transparent amber film that retains its high dielectric strength over a very wide range of temperatures. It remains flexible at liquid helium temperature minus 269 Degrees C and does not lose its strength until it reaches a temperature of 815 Degrees C. The maximum tubing temperature indicated in the properties chart is lower since the sealing agent used in the spiral winding process to produce Kapton(R) tubing limits its high temperature usage. Tubing made of Kapton(R) offers a rare combination of a high dielectric strength within an extreme temperature range. Kapton(R) is flame resistant and begins to char only above 800 Degrees C. It does not melt and is self extinguishing. It has excellent mechanical properties and is practically unaffected by moisture. There is no known organic solvent for Kapton(R). Due to the spiral winding process this tubing is not recommended for pressure applications however liquids and gasses may be conveyed in it. It is classified in the Superpolymer category of plastics and the benchmark for electrical and thermal insulation.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 20, 2011 12:05:03

Translucent Amber Miniature Polyimide Tubing, 16 AWG, 0.0508" ID, 0.0583" OD, 0.00375" Wall, 12" Length (Pack of 50)

Translucent Amber Miniature Polyimide Tubing, 16 AWG, 0.0508" ID, 0.0583" OD, 0.00375" Wall, 12" Length (Pack of 50) Reviews

Other Picture

When thin walls, tight tolerances and high strength are required, polyimide is the material of choice. Polyimide is in the select group of super polymers and is now available in micro and miniature tubing sizes. Our tubing has a thermal rating of -452F (-269C) To 700F (371C) for continuous use application with a dielectric constant of 3.4. This material is considered a benchmark for polymers in electrical insulation applications. This tubing exhibits exceptional dimensional stability and has very high burst pressure ratings. Excellent column strength and high stiffness has proven to provide good push and torque properties making polyimide tubing an excellent choice for catheters that are guided through the body's vascular system. Other uses include high strength, temperature and chemical resistant push rod tubes, and miniature structural matrices. This tubing can be steam, gamma or EtO sterilized and has excellent chemical resistance. Polyimide tubing can be bonded with cyanoacrylates, UV and room temperature cure epoxies.

Visit Store Now !!

Detail Products

• Stainless Steel 304 Hypodermic Round Tubing, 18 Gauge, 0.0500" OD, 0.03" ID, 0.01" Wall, 60" Length
• Translucent Amber PEEK Tubing, 20 AWG, 0.032" ID, 0.036" OD, 0.002" Wall, 24" Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.005" Diameter, 36" Length (Pack of 5)
• Stainless Steel 316 Hypodermic Round Tubing, 16 Gauge, 0.0650" OD, 0.047" ID, 0.009" Wall, 60" Length
• Tan PEEK Tubing, 0.040" ID, 0.062" OD, 0.011" Wall, 10' Length

Detail Reviews

Jun 18, 2011 15:53:04

Translucent Amber Miniature Polyimide Tubing, 31 AWG, 0.0089" ID, 0.0104" OD, 0.00075" Wall, 12" Length (Pack of 50)

Translucent Amber Miniature Polyimide Tubing, 31 AWG, 0.0089" ID, 0.0104" OD, 0.00075" Wall, 12" Length (Pack of 50) Reviews

Other Picture

When thin walls, tight tolerances and high strength are required, polyimide is the material of choice. Polyimide is in the select group of super polymers and is now available in micro and miniature tubing sizes. Our tubing has a thermal rating of -452F (-269C) To 700F (371C) for continuous use application with a dielectric constant of 3.4. This material is considered a benchmark for polymers in electrical insulation applications. This tubing exhibits exceptional dimensional stability and has very high burst pressure ratings. Excellent column strength and high stiffness has proven to provide good push and torque properties making polyimide tubing an excellent choice for catheters that are guided through the body's vascular system. Other uses include high strength, temperature and chemical resistant push rod tubes, and miniature structural matrices. This tubing can be steam, gamma or EtO sterilized and has excellent chemical resistance. Polyimide tubing can be bonded with cyanoacrylates, UV and room temperature cure epoxies.

Visit Store Now !!

Detail Products

• Stainless Steel 304 Hypodermic Round Tubing, 19 Gauge, 0.0420" OD, 0.032" ID, 0.005" Wall, 60" Length
• Translucent Amber PEEK Tubing, 20 AWG, 0.032" ID, 0.036" OD, 0.002" Wall, 24" Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.005" Diameter, 36" Length (Pack of 5)
• Stainless Steel 316 Hypodermic Round Tubing, 9 Gauge, 0.1480" OD, 0.128" ID, 0.01" Wall, 60" Length
• Tan PEEK Tubing, 0.062" ID, 0.125" OD, 0.032" Wall, 3' Length

Detail Reviews

Jun 16, 2011 11:25:04

Translucent Amber PEEK Tubing, 34 AWG, 0.006" ID, 0.012" OD, 0.0030" Wall, 36" Length

Translucent Amber PEEK Tubing, 34 AWG, 0.006" ID, 0.012" OD, 0.0030" Wall, 36" Length Reviews

Other Picture

The combination of PEEK material, thin walls and large size range (from miniature .007" to .335") make for a product development dream. PEEKs inherent purity and lubricity make it an ideal choice for analytical and life sciences applications. Its continuous operating temperature of 500 degrees F coupled with the tough, abrasion resistance and stiff properties yield a truly unique tubing used as a conduit for fluids, gasses, fiber optics and wire. The tubing may also be fastened into mechanical matrices yielding strong, lightweight, high temperature chemically-resistant structures. With the exception of concentrated sulphuric acid or nitric acids, PEEK is extremely resistant to a wide range of chemical environments even at elevated temperatures. PEEK is a highly crystalline thermoplastic that will withstand multiple sterilizations from all known methods. Material is made from USP Class VI material. Color is tan.

Visit Store Now !!

Detail Products

• Translucent Amber Miniature Polyimide Tubing, 28 AWG, 0.0126" ID, 0.0186" OD, 0.0030" Wall, 30" Length
• White Translucent Miniature PTFE Tubing, 8 AWG, 0.110" ID, 0.114" OD, 0.002" Wall, 72" Length
• Stainless Steel 304 Hypodermic Round Tubing, 19 Gauge, 0.0420" OD, 0.032" ID, 0.005" Wall, 60" Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.005" Diameter, 36" Length (Pack of 5)
• Tan PEEK Tubing, 0.062" ID, 0.125" OD, 0.032" Wall, 3' Length

Detail Reviews

Jun 15, 2011 05:56:04

Zeus PFA Heavy Wall Tubing 3/8OD x 1/4ID x .063 Wall, USP Class VI, 25 feet

Zeus PFA Heavy Wall Tubing 3/8OD x 1/4ID x .063 Wall, USP Class VI, 25 feet Reviews

Other Picture

Zeus PFA Heavy Wall Tubing 3/8OD x 1/4ID x .063 Wall, USP Class VI, 25 feet Feature

• Maximum working temperature 500 F (260 C)
• Combines attributes of PTFE and FEP
• Maintains a mechanical strength at high temperatures
• Superior high purity properties
• Chemically Inert

PFA tubing is often the resin of choice when additional clarity, flexibility, and a higher continuous service temperature are required. Zeus has formulated, developed, and produced this special line of heavy construction tubing for use where very high levels of strength, reliability, durability, and easy handling are required. Integral with this tubing are all of the well-known characteristics of fluoropolymers: low coefficient of friction, high heat resistance, abrasion resistance, chemical inertness, stability, and many other advantageous features. Zeus Heavy Construction tubing is ideal for automotive, chemical, and mechanical applications. It is also highly acceptable for use as laboratory ware or in conjunction with medical instruments, equipment, and applications. In addition to its strength, it is non-toxic, non-allergenic, easily sterilized, and features low water absorption.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 14, 2011 04:28:05

Zeus PTFE (Teflon) Light Wall Tubing 3 Gauge 10' Length Coil or Spool

Zeus PTFE (Teflon) Light Wall Tubing 3 Gauge 10' Length Coil or Spool Reviews

Other Picture

Zeus PTFE (Teflon) Light Wall Tubing 3 Gauge 10' Length Coil or Spool Feature

• Biocompatible USP Class VI
• Flame Resistant UL 94 VO
• -454 to 500 Degrees
• Limiting Oxygen Index Greater Than 95
• ETO and Autoclave Sterilizable

PTFE (Polytetrafluoroethylene), Sometimes referred to as Teflon is lightweight, semi flexible, and is used for a variety of laboratory applications. Heat resistant to 500 Degrees F (260 Degrees C) continuous. Highly valued for its toughness and insulating qualities, as well as high dielectric strength over a wide range of frequencies.ETO and Autoclave sterilization. Non absorbent to water and unaffected by acids and alkali's. Should not be heated to temperatures above 752 Degrees F (400 Degrees C). Color: White Translucent Natural.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 13, 2011 05:11:04